Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2007 >> RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Cover >> Service and Repair >> Cover - Timing >> Installation

Installation






INSTALLATION




1. Install a new front crankshaft oil seal.
2. Obtain a seal pilot (1) installation tool from a crankshaft front seal service kit and install the pilot into the seal.
3. Apply a bead of Mopar(R) Silicone Rubber Adhesive Sealant or equivalent to the gear housing cover. Be sure to surround all through holes.
4. Using the seal pilot to (1) align the cover, install the cover to the housing and install the bolts. Tighten the bolts to 24 Nm (18 ft. lbs.) torque.
5. Remove the seal pilot. Install front seal dust shield.
6. Raise the vehicle.
7. Install the speed indicator ring and the crankshaft damper.
8. Lower vehicle.
9. Install the fan support/hub assy, and tighten bolts to 32 Nm (24 ft. lbs.) torque.
10. Install power steering pump.
11. Install accessory drive belt tensioner. Torque bolt to 43 Nm (32 ft. lbs.) torque.
12. Install the accessory drive belt.
13. Install the cooling fan/drive/shroud assembly.
14. Install the radiator upper hose and clamps.
15. Add coolant.
16. Connect the battery cables.
17. Start engine and inspect for leaks.
pro multis · About Operation CHARM