Installation

INSTALLATION




1. Position the Totally Integrated Power Module (1)(TIPM) into the vehicle.


NOTE: Totally Integrated power module electrical connectors are color coded to ease location reference.

2. Connect the electrical connectors (2) by pushing straight on and rotating the connector arm inboard, until the connector is firmly locked in place on the TIPM assembly (1).





3. Turn the TIPM (1) so that the connector side is facing down. Install the assembly onto the TIPM battery tray bracket (3) making sure to line up the lower retaining tab with the retaining slot in the tray (1).

4. Push the TIPM (1) downward to lock the upper retaining clips into the bracket (3).





5. Install the B+ terminal cable (5) and nut (6) on the B+ terminal of the TIPM (2).

6. Connect the battery negative cable.