Cylinder Head Assembly: Specifications

Cylinder Head:

Cylinder Head





Cylinder Head-Bolts
Step 1 70 Nm (52 ft.lbs.)
Step 2 Back off 360 degrees in sequence
Step 3 105 Nm (77 ft. lbs.)
Step 4 Recheck all bolts to 105 Nm (77 ft. lbs.)
Step 5 Rotate All Bolts 1/4 Turn (90 degrees)

Exhaust Manifold Bolts
Install the bolts and spacers and tighten the bolts in the sequence shown in to 43 Nm (32 ft. lbs.) torque.

Intake Manifold
Install the cover-to-cylinder head bolts that do not hold down the fuel rail.
Tighten the bolts to 24 Nm (18 ft. lbs.) torque.