Body Repair Manual
Adjust engine hoodAdjusting
A- Left, right gap width
B- Hood depth and flushness
1 Hood lock top section
2 Lock nut
3 Locking pin
4 Rubber pad
1 Adjust gap width between engine hood and fender By horizontally offsetting hinges (A).
2. Adjust hood depth and flushness in relation to fender By moving engine hood (B) vertically.
3. Loosen hood lock upper section (1) and align on hood lock bottom section
4. Tighten hood lock upper section
5. Loosen lock nut (2) and adjust striker pin (3) to correct height. Adjust engine hood on hood lock upper section to height.
6. Screw on lock nut (2)
7. Adjust height of hood at front on rubber pad (4) on right and left