Service Manual

HOOD ADJUSTMENT




1. Check installation position of hood (3), if necessary adjust hood.
2. Loosen nuts (1).
3. Loosen bolts (2).
4. Check and adjust the hood gaps to specifications, Gap and Flush Specifications.
5. Tighten the bolts (2) to 23 Nm (17 ft. lbs.).
6. Tighten the nuts (1) to 20 Nm (15 ft. lbs.).
7. Adjust height of stop bumper (5) so that the upper edges of the front fender (6) and engine hood (3) are flush.
8. Check whether engine hood locks properly and adjust if necessary.