Chime/Buzzer

9012-PTS SENSOR 5 RING TIME TOO LONG

For a complete wiring diagram refer to Diagrams/Electrical.







Diagnostic Test

1. CHECK FOR ACTIVE DTC

Turn the ignition on.

With the scan tool, read DTCs.

Is the DTC active?

Yes

- Go To 2

No

- The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chaffed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.


2. REPLACE PARK ASSIST SENSOR

View Repair

Repair

- Replace Park Assist Sensor.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test