Wipers/Washers

9083-RAIN LIGHT SENSOR INTERNAL-RCM

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

With the ignition on.

- Set Condition:

This DTC is set when an internal fault is set in the rain light sensor.






Diagnostic Test

1. RAIN LIGHT SENSOR

With the scan tool read RCM DTCs.

Does the scan tool read: 9083-RAIN LIGHT SENSOR INTERNAL-RCM?

Yes

- Replace the Rain Light Sensor.
-

NOTE: The Rain Light Sensor must be reprogrammed after replacement.

- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test complete.