Installation

INSTALLATION





1. Position the 7-way trailer tow connector (1) into the bracket (4) on the trailer hitch receiver (2).
2. Install and tighten the four screws (6) that secure the 7-way trailer tow connector to the bracket. Tighten the screws to 4 Nm (35 in. lbs.).
3. Reach behind the bracket to access and reconnect the connector (3) of the body wire harness to the 7-way trailer tow connector, or to engage the 4-way trailer tow connector (5) to the bracket.
4. Reconnect the battery negative cable.