Power Seat Track - Installation

INSTALLATION

1. Position the power seat track assembly on the seat cushion frame and compare the old and replacement seat tracks to be certain the correct part is available.
2. If the vehicle is equipped with a split bench seat, Install the fasteners that secure the center seat cushion section to the brackets on the power seat track assembly.
3. Install the four bolts that secure the power seat track assembly to the seat cushion frame. Torque the bolts to 27 Nm (20 ft. lbs.).
4. Install the power seat wire harness retainers on the seat track assembly.
5. Connect the power seat wire harness connectors.
6. Install the driver side seat assembly in the vehicle. Seat - Installation for the procedure.
7. Connect the battery negative cable.