Front Stabilizer Bar - Installation

INSTALLATION





1. If removed, install the bushings on the stabilizer bar.
2. Position the stabilizer bar (1) on the frame crossmember brackets and install the bracket (3) and bolts (2) finger-tight.

NOTE: Check the alignment of the bar to ensure there is no interference with the either frame rail or chassis component. Spacing should be equal on both sides.

3. Install the stabilizer bar (1) to the stabilizer link and install the grommets and retainers.
4. Install the nuts (6) to the stabilizer link and tighten to 23 Nm (17 ft. lbs.) Front Stabilizer Link - Installation.
5. Tighten the bracket bolts (2) to the frame to 61 Nm (45 ft. lbs.).