Right Doors Lock Only - Quad Cab

*RIGHT DOORS LOCK ONLY - QUAD CAB





For a complete wiring diagram Consult Diagrams/Electrical.





NOTE: If the G778 circuit is shorted, the fuse may blow after one attempt to operate the locks.

Diagnostic Test

1. CHECK FOR ACTIVE DTC's
Turn the ignition on.
With the scan tool, read active DTC's.
Does the scan tool display any Door Lock related DTC's?

No

- Go To 2

Yes

- Diagnose and repair the DTC(s).

2. CHECK THE (G778) DOOR UNLOCK DRIVER RIGHT DOORS CIRCUIT FOR A SHORT TO GROUND




Turn the ignition off.
Disconnect the Cluster C1 connector.
Measure the resistance between ground and the (G778) Door Unlock Driver Right Doors circuit.
Is the resistance below 1000.0 ohms?

No

- Replace the Cluster.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

Yes

- Repair the (G778) Door Unlock Driver Right Doors circuit for a short to ground.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test