Camshaft Bearing

CAMSHAFT BEARING CAP TORQUE AND SEQUENCE





NOTE: Position the left side camshaft so that the camshaft sprocket dowel is near the 1 o'clock position, This will place the camshaft at the neutral position easing the installation of the camshaft bearing caps.

1. Install the camshaft bearing caps, hand tighten the retaining bolts.
2. Working in 1/2 turn increments, tighten the bearing cap retaining bolts following the torque sequence.
3. Tighten the camshaft bearing cap retaining bolts to 11 Nm (100 in. lbs.).