Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2008 >> Durango 2WD V8-4.7L Flex Fuel >> Repair and Diagnosis >> Heating and Air Conditioning >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair >> Front Blower Motor Power Module - Installation

Front Blower Motor Power Module - Installation







INSTALLATION





1. Position the blower motor power module (2) into the front HVAC housing (4).
2. Install the two screws (3) that secure the blower motor power module to the front HVAC housing. Tighten the screws to 2 Nm (17 in. lbs.).
3. Connect the two wire harness connectors (1) to the blower motor power module.




4. If equipped with a trim cover (2), install the trim cover over the blower motor power module (3) and install the two retaining screws (1). Tighten the screws to 2 Nm (17 in. lbs.).
5. Reconnect the negative battery cable.
pro multis · About Operation CHARM