Seat Side Shield - 2nd Row Swivel - Installation

INSTALLATION

NOTE: Outboard side shield shown. Inboard side shield similar.





1. If servicing the outboard seat side shield (1), install the shield over the release handle (5) and install the two screws (4) that secure the center of the shield to the seat riser (3). Tighten the screws securely.
2. If servicing the inboard seat side shield, position the shield to the seat riser and engage the two retaining tabs that secure the center of the shield to the riser.
3. Install the screws (2 and 6) that secure the front and back of each seat side shield to the seat riser. Tighten the screws securely.
4. Install the seat into the vehicle.