Seat Side Shield - 2nd Row Swivel - Removal

REMOVAL

NOTE: Outboard side shield shown. Inboard side shield similar.





1. Remove the seat from the vehicle and place it on a workbench.
2. Remove the screws (2 and 6) that secure the front and back of each seat side shield (1) to the seat riser (3).
3. If servicing the outboard seat side shield, remove the two screws (4) that secure the shield to the seat riser directly behind the pivot release handle (5) and remove the shield.
4. If servicing the inboard seat side shield, disengage the two retaining tabs that secure the center of the shield to the seat riser and remove the shield.