Front Blower Motor Power Module - Description

DESCRIPTION





A blower motor power module is used on this model when equipped with the automatic temperature control (ATC) heating-A/C system. Models equipped with the manual temperature control (MTC) heating-A/C system use a blower motor resistor block, instead of the blower motor power module.

The front blower motor power module is mounted to the rear of the HVAC housing, on the passenger side of the vehicle. The blower motor power module consists of a molded plastic mounting plate (1) with two integral wire connector receptacles (3). Concealed behind the mounting plate is the power module electronic circuitry and a large finned heat sink (2).

The blower motor power module is accessed for service from underneath the instrument panel.