step 11 - 20

DISASSEMBLY

11. Remove the bolt (3) holding the detent spring.
12. Remove the detent spring (2).




13. Remove valve body bolts (1).




14. Remove valve body (1) from oil transfer tubes and manual valve (3) from rooster comb.




15. Remove oil transfer tubes (2) from the case.









16. Remove all six accumulators (1, 2, 3, 5, 6 and 7) from case along with the accumulator return springs.
17. Remove the 2/4 clutch oil supply seal (4) from the case.
18. Remove the manual lever, TRS and sealRemoval.




19. Measure input shaft end play. Place transaxle so input shaft is vertical. Set up End Play Socket Set 8266A (1,2) and dial indicator (3). Input shaft end play should be within 0.13-0.64 mm (0.005-0.025 in.) Record indicator reading for reference upon reassembly.




20. Remove the front pump bolts (1).