B1D62

B1D62-POWER SEAT SWITCH STUCK

For a complete wiring diagram REFER to DIAGRAMS/ELECTRICAL .


- When Monitored:
Continuously.

- Set Condition:
When the Memory Seat Module detects the Driver Seat Switch engaged in an active position for over 50 seconds, this code will set.






Diagnostic Test


1. TEST FOR INTERMITTENT CONDITION
Turn the ignition on.
With the scan tool, erase all DTC's.
Press the Driver Seat Switch in all directions several times.
Wait one minute.
With the scan tool, read DTC's.
Does the scan tool display active: B1D62-POWER SEAT SWITCH STUCK?

Yes


- Replace the Driver Seat Switch.
- Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1. Power Seat System Verification Test


No


- The condition that caused this symptom is currently not present. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also, inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals. Repair as necessary.
- Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1. Power Seat System Verification Test