B2229

B2229-SKREEM INTERNAL - SKIM IMMOBILIZER

For a complete wiring diagram REFER to DIAGRAMS/ELECTRICAL .

Theory of Operation


Whenever a fobik is inserted in the Wireless Ignition Node (WIN) base station, the WIN performs an internal self test. The repair of this fault condition does not involve any external wiring and centers on verifying the integrity of the module's internal circuitry.


- When Monitored:
The WIN checks the status of the internal antenna used to send and receive communication with the fobiks.

- Set Condition:
This DTC sets when the WIN detects a failure of the internal antenna.







Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.Initial Inspection and Diagnostic Overview


Diagnostic Test


1. DETERMINE ACTIVE OR STORED DTC
Is the DTC active or stored?

WIN - ACTIVE DTC


- Go To 2


WIN - STORED DTC


- Perform the THEFT AND SECURITY SYSTEMS VERIFICATION TEST.Theft and Security System Verification Test


2. REPLACE THE WIN

NOTE: Ensure the part number of the replacement module is the correct part number for the vehicle.

View Repair

Repair

NOTE: Technicians must use the scan tool to perform the WIN Programming procedure after a module replacement.
Replace the Wireless Ignition Node.
- Perform the THEFT AND SECURITY SYSTEMS VERIFICATION TEST.Theft and Security System Verification Test