Front

INSTALLATION





1. Place carpet inside vehicle through sliding door opening.
2. Roll carpet rearward toward rear door opening.
3. Install the third row seatsSeat - Installation.
4. Install the rear carpet nuts attaching rear of carpet.
5. Install the quarter trim panel.
6. Roll carpet forward under instrument panel.
7. Install push pin fasteners attaching carpet to floor in front seat area.
8. Install the lower B-pillar trim coversB-Pillar Trim.
9. Install the sliding door sill platesSliding Door Sill Scuff Plate - Installation.




10. Install the second row Stow N Go door assemblyInstallation.
11. Install the sill plates and front cowl panelsDoor Sill Scuff Plate - Installation andCowl Trim - Installation.




12. Install the winch plug (spare tire winch) (1).
13. Install the heel blocker (plastic block below accelerator pedal).
14. Install the floor console base tray and disconnect wire connector from the base trayFloor Console Base Tray - Installation.
15. Install the instrument panel storage binInstallation.
16. Install the front seatsSeat - Installation.
17. Install the floor mats.