Front

REMOVAL





1. Remove floor mats.
2. Remove front seatsSeat - Removal.
3. Remove instrument panel storage binRemoval.
4. Remove the floor console base tray and disconnect wire connector from the base trayFloor Console Base Tray - Removal.
5. Remove heel blocker (plastic block below accelerator pedal).
6. Remove winch plug (spare tire winch) (1).




7. Remove the sill plates and front cowl panelsDoor Sill Scuff Plate - Removal andCowl Trim - Removal.
8. Stow N Go second and third row seats.
9. Remove the second row Stow N Go door assemblyRemoval.




10. Remove sliding door sill platesSliding Door Sill Scuff Plate - Removal.
11. Remove lower B-pillar trim coversB-Pillar Trim.
12. Remove push pin fasteners attaching carpet to floor in front seat area.
13. Roll carpet from under instrument panel to center of sliding door.
14. Remove the quarter trim panel.
15. Remove rear carpet nuts attaching rear of carpet.
16. Remove the third row seatsSeat - Removal.
17. Roll and fold carpet forward away from rear door opening.
18. Remove carpet through sliding door opening.