Installation

INSTALLATION





NOTE: Make sure the remote start antenna is positioned the same way noted during the removal procedure.

1. Install the remote start antenna module (2), and screws (1) to instrument panel assembly. Tighten to 2.5 Nm (22 in. lbs.).
2. Route the remote start coaxial cable in the position noted during the removal procedure.
3. Install the remote start antenna coaxial cable to mounting clips, if equipped.




4. Connect remote start antenna coaxial cable connector (2) to the wireless ignition node (WIN) (1).
5. Install instrument clusterInstrument Cluster - Installation.
6. Install the knee blocker. Refer toInstallation.
7. Install the instrument panel top cover. Refer toInstrument Panel Cover - Installation.
8. Connect the negative battery cable, tighten the nut to 5 Nm (45 in. lbs.).