2nd Row Swivel

REMOVAL

NOTE: Right seat shown in illustrations. Left seat similar.





1. Remove the seat from the vehicle and place it on a workbench.
2. Remove the seat cushion side shieldsSeat Cushion Side Shields - Removal.
3. If equipped with heated seats, disconnect the seat back wire harness connector located at the rear of the seat cushion.
4. Remove the two bolts (3) that secure the inboard seat back hinge (2) and the seat belt latch (1) to the seat cushion frame (4).




5. Remove the two bolts (4) that secure the outboard seat back hinge (1) and the seat belt anchor (2) to the seat cushion frame (3).
6. Remove the seat back and seat back hinges from the seat cushion frame as an assembly.




7. Remove the push-pin retainer (1) and seat belt anchor (2) from the outboard side of the seat cushion frame (3).