2nd Row Swivel

INSTALLATION

NOTE: Right seat shown in illustrations. Left seat similar.

1. With the seat back hinges (4) in the fold forward position, engage the spring arms (5) to the rear of the seat back frame (2).
2. Position the seat back hinges to the seat back frame and install the four retaining bolts (1 and 3). Tighten the bolts to 48 Nm (35 ft. lbs.).

3. Position the seat back hinge panel (4) to the seat back hinges (2) and install the four retaining screws (1 and 3). Tighten the screws securely.

4. Position the seat back panel (4) the rear of the seat back frame (3) and engage the two retaining tabs (5) that secure the top of the panel to the frame. Make sure the tabs are fully engaged to the frame.
5. Engage the two push-pin retainers (1) that secure the bottom of the seat back panel to the seat back frame. Make sure the retainers are fully engaged to the frame.
6. Install the seat belt and retractor assembly (2)Seat Belt and Retractor - Installation.
7. Install the seat back cushion and coverSeat Back Cushion / Cover - Installation.
8. Install the seat back Seat Back - Installation.
9. Install the seat into the vehicle.