Third Row - Leg Latch Actuator Position Switch

REMOVAL





NOTE: The procedure for replacing the seat leg latch position switch is the same for both the 60 and 40 third row power folding seats. The following steps should be performed only on the seat with the inoperative seat leg latch position switch.

1. Remove the effected third row power folding seat,Seat - Removal.
2. Remove the seat cushion and cover assembly,Seat Cushion / Cover - Removal.
3. Disconnect the electrical connector for the effected switch (1).




4. Using the appropriate size drill bit, remove the rivet (2) securing the switch (1) to the seat leg assembly (3).
5. Remove the tie strap holding the switch wire harness and leg latch release cable (5) to the seat leg assembly.
6. Remove the switch from the seat leg.