Power Window Switch - Removal

REMOVAL






SWITCH-DRIVER DOOR






1. Disconnect and isolate the battery negative cable.
2. Using a pry tool, gently remove the switch assembly (1) or the vent window switch (2) from the door trim panel.
3. Disconnect the electrical connectors.


SWITCH-PASSENGER DOOR






1. Disconnect and isolate the battery negative cable.
2. Using a pry tool, gently remove the switch assembly from the door trim panel.
3. Disconnect the electrical connector.


SWITCH-SLIDING DOORS






1. Disconnect and isolate the battery negative cable.
2. Using a pry tool, gently remove the switch assembly from the door trim panel.
3. Disconnect the electrical connector.