step 21 - 30

DISASSEMBLY





CAUTION: Be sure input speed sensor is removed before removing oil pump.

21. Install oil pump puller C-3752.(1) on oil pump.




22. Remove oil pump assembly (1).




23. Remove oil pump gasket (2).




CAUTION: If transaxle failure has occurred, the cooler bypass valve must be replaced. Do not re-use or attempt to clean valve.

24. Remove cooler bypass valve (2).




25. Remove number one needle bearing (1).




26. Remove input clutch assembly (1).




27. Remove number four thrust plate (2).




28. Remove front sun gear assembly (1) and number four thrust washer (2).




29. Remove front carrier/rear annulus assembly (2) and number six needle bearing (1).




30. Remove rear sun gear (2) and number seven needle bearing (1).