step 51 - 60

DISASSEMBLY

51. Lift the transfer gear from the underdrive compounder shaft.




52. Using Gear Puller L-4407 (1) and Button 6055 (3) remove output shaft transfer gear (2) and select shim.




53. Using Puller Set 5048 with Jaws 5048-5 and button L-4539-2 (1) remove output gear bearing cone.




54. Using Puller C-293 -PA (1), Adaptors 9738 (3) and Press Plug 9678 remove compounder transfer gear bearing cone.




55. Remove rear carrier assembly (1) from transaxle (2).




56. Remove rear carrier assembly (3) bearing cone using Puller Set 5048 with Jaws 5048-3 and Button 6055.




57. Install Disk 6057 (1), Compressor 5059 (2) and Compressor Bar 5058-3 (3).




58. Compress low/reverse spring using Compressor 5059 (4).




59. Remove snap ring (1) at low/reverse piston return spring.




60. Remove low/reverse spring compressor tool and low reverse piston return spring (1).