Installation

INSTALLATION





1. If required, install new plastic inserts (4) into the front fender (7).
2. Position the front fender onto the body and loosely install all fender retaining bolts.
3. Align the front fender and add shims, if required .
4. Tighten the bolts (2 and 6) to 9 Nm (80 in. lbs.).
5. Tighten the bolts (1, 3 and 5) to 12.5 Nm (9 ft. lbs.).
6. Install the wheelhouse splash shield Installation .
7. Install the headlamp unit Front Lamp Unit - Installation .
8. Install the cowl grille Cowl Moulding / Trim .
9. Install the battery tray, if required Battery Tray - Installation .
10. Install the antenna Antenna Body & Cable - Installation .