Description

DESCRIPTION

Momentary contact push button switch/modules mounted in the instrument panel center bezel operate the heated seat system. Each heated seat switch/module has two Light-Emitting Diode (LED) indicator lamps, which indicate the selected level (Low or High) of the seat heater. Pressing the switch/module button initiates heat. Heat remains on until switched off or until the ignition is turned off. If switched off by the ignition, a switch/module button must be pressed to restart heating.

The switch/modules contain the solid state electronic control and diagnostic logic circuitry for the heated seat system. If any of the heated seat elements are inoperative or damaged one or more of the LED lamps in the switch/module for the effected seat will flash.

The LED indicator lamps in each heated seat switch/module cannot be repaired. If the LED lamps are faulty or damaged, or the switch/module is inoperative or damaged the individual heated seat switch/module assembly must be replaced. Heated Seat Switch - Removal for the switch/module replacement procedure.