Removal

REMOVAL





1. Remove half shaft from disconnect side of the axle.
2. Remove disconnect actuator wiring connector.
3. Remove disconnect actuator (1) bolts (2) and remove actuator.




4. Remove O-ring (1) and snap ring (2) from output shaft.




5. Remove disconnect seal (1) bolts (2).




6. Remove output shaft (1) and disconnect seal (2) with Remover 8420A (3) and Slide Hammer C-3752.




7. Slide disconnect collar (1) from intermediate shaft (2) and remove through disconnect pocket.




8. Remove differential cover.
9. Drive intermediate shaft (1) out of side gear with a hammer and brass punch (2).




10. Remove intermediate shaft (1) from axle tube (2).