Removal

REMOVAL





1. Remove propeller shaft.
2. Remove bottom two carrier bolts (1) and drain fluid.




3. Remove axle shaft bolts (1) from axle flange (2).




4. Remove axle shaft from axle shaft (1).




5. Remove a bolt from each side of the carrier and two more bottom bolts.
6. Install a Guide Pins 10047 (2) into each side of the housing.
7. Attach Fixture 10048 (3) to transmission jack with fixture clamps.
8. Guide Fixture 10048 (3) onto the carrier and Guide Pins 10047 (2).




9. Remove remaining carrier bolts.
10. Slid fixture (4) with carrier (1) out of the axle housing about three inches onto the Guide Pins 10047 (2).
11. Bolt both sides of the Fixture 10048 (4) to carrier (1) with two carrier bolts (3).




12. Slid the carrier (2) off Guide Pins 10047 and out of the housing (1) with transmission jack and fixture.