Vehicle Theft Security

B210E-BATTERY VOLTAGE HIGH





For a complete wiring diagram Refer to Diagrams/Electrical.


- When Monitored:
With the ignition on.

- Set Condition:
If the Sentry Key Remote Entry Module (SKREEM) detects voltage is above a calibrated value on the (A114) Fused B(+) circuit.







Diagnostic Test


1. VERIFY THAT THE DTC IS ACTIVE
CAUTION: Diagnose and repair all Powertrain DTCs before continuing.

Turn the ignition on.
With the scan tool, record and erase the SKREEM DTCs.
Perform 5 ignition cycles, leaving the ignition switch on for a minimum of 90 seconds per cycle.
Using the scan tool, read the SKREEM DTCs.
Does the DTC reset?

Yes


- Replace and program the SKREEM.
- Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests .


No


- Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests .