EBC 445 ESP

C2206-VEHICLE CONFIGURATION MISMATCH

For a complete wiring diagram Refer to Diagrams/Electrical.


- When Monitored:
Ignition on.

- Set Condition:
This DTC will set if the vehicle type is not identified or incorrectly identified.







Diagnostic Test


1. ANTI-LOCK BRAKE MODULE
NOTE: Diagnose and repair any Powertrain Control Module VIN or Communication DTCs before continuing with this test.

NOTE: If C2202-Original VIN Mismatch / Missing is set along with this DTC, perform the diagnostic procedure for C2202 before continuing with this test.

Turn the ignition on.
With the scan tool, clear DTCs.
Turn the ignition off.
Turn the ignition on.
With the scan tool, select View DTCs.
Is the status Active for this DTC?

Yes


- Check vehicle configuration in TIPM. If configuration incorrect, fix and reinitialize ABS module.
- Perform ABS VERIFICATION TEST. ABS Verification Test


No


- Use the scan tool to read DTCs in all other modules. If any communication DTCs are present, perform the appropriate diagnostic procedure. Refer to any Technical Service Bulletins that apply. If no problems are found, test is complete.