Compass Mini - Trip Computer

COMPASS MINI - TRIP COMPUTER

NOTE: If a new Compass Mini - Trip Computer has been installed, the compass will have to be calibrated and the variance set. Manual Compass Calibration and Adjustments for the appropriate procedures.





1. Position the CMTC (4) onto the overhead console housing (3).
2. Install the screws (1) that secure the CMTC (4) to the overhead console housing (3). Tighten the screws to 2 Nm (20 in. lbs.).
3. Install the overhead console (3) onto the headliner Installation .
4. Reconnect the battery negative cable.