Disassembly

DISASSEMBLY





1. Remove planetary snap-ring (1) from intermediate shaft. Discard snap-ring as it is not reusable.




2. Remove front planetary gear (3) and front annulus gear (2) as assembly.




3. Remove front planetary gear (1) and thrust washer (2) from front annulus gear (3). Note thrust washer position for assembly reference.




4. Remove tabbed thrust washer (2) from driving shell (1). Note washer position for assembly reference.




5. Remove sun gear (3) and driving shell (2) as assembly.




6. Remove tabbed thrust washer (2) from rear planetary sun gear (1). Note washer position on gear for assembly reference.




7. Remove rear planetary gear (3) and rear annulus gear (2) from intermediate shaft (1).




8. Remove thrust washer (2) from rear planetary annulus gear (1).