C123A

C123A-ESP SYSTEM SENSORS CALIBRATION

For a complete wiring diagram Refer to Diagrams/Electrical.


- When Monitored:
Once per ignition cycle.

- Set Condition:
If the calculated checksum does not match the stored checksum.







Diagnostic Test


1. INITIALIZE ANTI-LOCK BRAKES MODULE
Initialize ECU refer to ABS VERIFICATION TEST - VER 1. ABS Verification Test .
Does this DTC reset?

Yes


- Replace the Anti-Lock Brake Module.
- Perform ABS VERIFICATION TEST - VER 1. ABS Verification Test .


No


- Test complete.