46E8

46E8-REAR RIGHT OUTLET VALVE CIRCUIT PERFORMANCE - SELF TEST FAILURE

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Ignition on.

- Set Condition:
The Anti-lock Brake Module has detected an internal error.





Diagnostic Test

1. ANTI-LOCK BRAKE MODULE INTERNAL CONDITION
The Anti-lock Brake Module is reporting internal errors.

NOTE: Before continuing, check the Anti-lock Brake Module harness connector terminals for corrosion, damage, or terminal push out. Repair as necessary.

Using the schematics as a guide, inspect the wire harness and connectors. Pay particular attention to all Power and Ground circuits.
Search for any Technical Service Bulletins that may apply.
Were there any problems found?

Yes

- Repair as necessary.
- Perform ABS VERIFICATION TEST. ABS Verification Test

No

- Replace the Anti-lock Brake Module.
- Perform ABS VERIFICATION TEST. ABS Verification Test