Power Locks

902A-DRIVER DOOR MODULE - HIGH TEMPERATURE OPERATION - DDM

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Continuously

- Set Condition:
When the Driver Door Module senses a heavy current load or a high thermal condition, this code will set.





Diagnostic Test

1. TEST FOR INTERMITTENT CONDITION
With the scan tool, record and erase DTC's
Operate the door lock switch in all positions several times and observe the locks.
Operate the driver window motor several times and observe the amount of speed and drag.
Cycle the ignition from on to off.
Turn the ignition on.
With the scan tool, read DTC's.
Does the scan tool display 902A-DRIVER DOOR MODULE - HIGH TEMPERATURE OPERATION?

Yes

- Repair any systems that were not operating properly. If all systems were okay, replace the Driver Door Module.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- The conditions that caused this code to set are not present at this time. Check engine DTC's for overheating and repair as necessary. Continue to check for any overheating conditions that may have caused this code to set.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test