Body Repair Manual
Removing and installing engine hoodRemoving
1 Engine hood
2 Hood support
3 Collar bolt
4 Washers
5 Hinge
6 Collared nut
1. Unscrew collar nuts (6) at the hinge (5) Support engine hood to prevent damage
2. Unscrew hood support (2) and remove engine hood
Installation
3. Place engine hood on hinges (5) Only position collar nuts and do not tighten
4. Install hood support and bolt securely
5. Adjust engine hood
6. Grease hinges (5)
Removal
1 Engine hood
2 Hood support
3 Fuse
4 Spring
5 Hinge
6 Collar nuts
1. Remove retainer (3) and hood support (2) with spring (4) from guide on engine hood (1). Support engine hood (1) to prevent damage. Pay attention to installation position of spring (4).
2. Unscrew collar nuts (6) from hinge (5) and remove engine hood (1)
Installation
3. Position engine hood (1) on hinges (5). Only fit collar nuts (6), do not tighten
4. Install spring (4), insert hood support (2) into guide on engine hood (1) and mount new retainer (3).
5. Adjust engine hood
6. Grease hinges (5).