Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2008 >> Sprinter 2500 V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Cover >> Service and Repair >> Timing Cover - Installation >> Upper Right Front Cover

Upper Right Front Cover







INSTALLATION





1. Clean the upper left front cover sealing surface (1) to be sure it is free of oil and debris.
2. Apply Loctite 7200 or equivalent sealing compound to the left upper front cover sealing surface. Apply the compound in the form of a bead with a height and width of 1.0 mm (+0.5 mm). The cover must be installed within 10 minutes of applying the sealing compound.
3. Install the upper right front cover (3).
4. Install the upper right front cover bolts and tighten them to 9 Nm ( 80 in. lbs.)
5. Position the engine harness and connect the right camshaft position sensor connectors.




6. Install the right air control valve gasket.




7. Install the right air control valve and bolts.
8. Tighten the right air control valve bolts to 14 Nm (124 in. lbs.).
9. Install the right air control valve air tube.
10. Install the air pump and engine cover bracket and tighten the bolts to 9 Nm ( 80 in. lbs.)




11. Connect the remote ground.




12. Install the engine cover.
pro multis · About Operation CHARM