Repeater Lamp - Removal

REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the upper (3) and lower (4) lenses from the right or left outside rear view mirror housing (5). Outside Rearview Mirror - Removal Outside Rearview Mirror Glass - Removal.
3. Remove the four screws (2) that secure the cover (1) to the mirror housing.
4. Pull the cover away from the mirror housing far enough to access and disconnect the vehicle wire harness connector from the repeater lamp bulb (6).
5. Unclip and remove the repeater lamp lens/housing unit (7) from the mirror cover.
6. Remove the bulb from the repeater lamp lens/housing.