Installation

INSTALLATION

1. Place cover downward over the shifter and connect the electrical connectors on the back side of the cover.
2. Position the cover into place and install the screws.
3. Position the shift lever sleeve back into place and seat the clips fully.




4. Install the center outlets (1) and install the screws (2).
5. Connect the accessory switch electrical connector.
6. Install the center bezel and seat the clips fully.
7. Install the center footwell cover, Installation Installation.
8. Install the steering column opening cover, Steering Column Opening Cover - Installation.
9. Install the glove box, Instrument Panel Glove Box - Installation.