Reading Lamp - Removal

REMOVAL

NOTE: On vehicles equipped with an optional overhead console the standard front dome lamp is replaced by two combination dome and reading lamps that are integral to the console housing. Each of these lamps is controlled by the door ajar switches on the courtesy lamp circuit, but also are independently controlled by a switch that is activated by depressing the lamp lens. The bulb types and service procedures are identical for both of these lamps.

NOTE: The overhead console reading lamp switches and bulb holders are serviced as a unit with the overhead console wire harness.





1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console (3) from the headliner. Overhead Console - Removal.
3. Firmly grasp the back of the reading lamp bulb socket (1) and unsnap it from the overhead console lamp housing.
4. Pull the socket and bulb (2) straight out from the keyed opening in the lamp housing.
5. Pull the base of the bulb straight out of the socket.