Integrated Power Module (IPM) - Removal

REMOVAL





1. Disconnect the battery negative cable.
2. Remove the Integrated Power Module (IPM) cover and remove the nut (5) from the IPM B+ terminal stud (6).
3. Remove the battery positive cable (4).





4. Remove the IPM (2) pushpin fasteners (1) from the battery tray (4).





5. Move the IPM (1) forward and up to disengage the locking tabs (2) from the battery tray locating slots (4).





6. Lift the IPM up to access and disconnect the wiring harness connectors from the Power Distribution Center (1) and Front Control Module (2).
7. Remove the IPM assembly from the vehicle.