A/C and Heater Control - Installation

INSTALLATION





1. Position the A/C-heater control (1) into the instrument panel center bezel.
2. Install the screws (2) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
3. Connect the wire harness connectors (3 and 4), to the back of the A/C-heater control and install the instrument panel center bezel Instrument Panel - Installation.
4. Reconnect the negative battery cable.
5. Initiate the Actuator Calibration function using a scan tool HVAC System Test.