Clutch Pedal Position Sensor / Switch: Testing and Inspection

CLUTCH PEDAL POSITION SWITCH






NOTE: The clutch pedal position switch prevents the starter motor engagement unless the clutch pedal is depressed. Input from the switch is used to shut down/prevent operation of speed control system when the clutch pedal is depressed.

1. Disconnect switch 2-wire connector (2) under instrument panel.
2. Check switch (3) continuity with an ohmmeter while operating clutch pedal.
- Pedal Depressed - Continuity
- Pedal Released - No Continuity

3. If continuity is not present or always present, replace clutch master cylinder (1). Switch is not serviced separately.