Switch

SWITCH

NOTE: Some vehicles are equipped with two hood ajar switches.





1. Unlatch and open the hood.
2. Disconnect and isolate the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician trained in proper HEV service safety procedures must also remove the high voltage service disconnect from the high voltage battery pack.
3. From the top of the left or right front fender inner shield, squeeze the two hood ajar switch latch tabs (1) together and pull the switch upward out of the mounting hole (2).
4. Pull the hood ajar switch up through the hole far enough to access and disconnect the wire harness connector (3) from the switch connector receptacle.
5. Remove the hood ajar switch from the vehicle.