Front Carpet

REMOVAL





1. Remove floor mats.
2. Remove front seats Seat - Removal.
3. Remove instrument panel storage bin Instrument Panel Bin - Removal.
4. Remove the floor console base tray and disconnect wire connector from the base tray Floor Console - Removal.
5. Remove heel blocker (plastic block below accelerator pedal).
6. Remove winch plug (spare tire winch) (1).





7. Remove the sill plates and front cowl panels.Scuff Plate - Removal and Cowl Trim Panel - Removal.
8. Stow N Go second and third row seats.
9. Remove the second row Stow N Go door assembly Load Floor - Removal.





10. Remove sliding door sill plates. Scuff Plate - Removal.
11. Remove lower B-pillar trim covers B-Pillar Trim Panel-Removal.
12. Remove push pin fasteners attaching carpet to floor in front seat area.
13. Roll carpet from under instrument panel to center of sliding door.
14. Remove the quarter trim panel. Quarter Trim Panel - Removal.
15. Remove rear carpet nuts attaching rear of carpet.
16. Remove the third row seats. Seat - Removal.
17. Roll and fold carpet forward away from rear door opening.
18. Remove carpet through sliding door opening.