Seat - Installation

INSTALLATION





1. Position the third row seat into the vehicle.
2. Install the bolts (1) that secure the four hinges at the rear of the seat to the floor panel. Tighten the bolts in the sequence shown to 89 Nm (66 ft. lbs.).





3. With the third row seat folded into the floor well, install the bolts (1) that secure the front of the seat to the floor panel. Tighten the bolts to 58 Nm (43 ft. lbs.).





4. Position the anchor molding (3) to the seat frame.
5. Align the locating pins (2) and engage the clips (1) that secure the anchor molding to the seat frame.